16
2023
-
10
How to do a good job in maintenance and repair of spark detection products
Author:
Spark detectors are used to monitor the dust removal pipeline connected to the storage bin and extinguish every spark before triggering a fire in the storage bin. Even if the spark is hidden in dense materials, the probe can sensitively detect it. Spark detection provides a great guarantee for our safety. Today, the Shandong spark detection manufacturer will take you to see how to do a good job in repairing a malfunction.
1、 When the use or management unit of spark detection alarm products discovers problems or malfunctions, they should promptly carry out repairs.
1. Spark alarm controllers, fire linkage controllers, and combustible gas controllers can be repaired on-site. During maintenance, a backup controller should be replaced; When there is no backup controller, effective fire safety measures should be taken or the use of the protected area should be suspended.
2. Spark detectors, modules, manual alarm buttons, and fire hydrant start buttons should generally be repaired within the maintenance enterprise. When the above components are removed for maintenance, spare parts should be replaced immediately, and corresponding parts should not be shielded; When there are no spare parts, effective fire safety measures should be taken for the area.
2、 Repair process
1. Inspect the structure and components of faulty products in accordance with the requirements of relevant technical documents and maintenance work instructions, and take corresponding maintenance measures and record any problems found.
2. For products with problems, the cause should be analyzed and recorded based on the fault phenomenon.
3. When replacing parts and components, moisture-proof, salt spray proof, and mold proof measures should be taken for the replaced parts, components, and corresponding parts of the product.
4. After product maintenance, inspection should be carried out according to relevant product standards, and the inspection results should be recorded. After passing the inspection, a qualified label should be affixed.